Portfolio Archive - JD Hardwood Floor fitting - South Manchester
0
archive,post-type-archive,post-type-archive-portfolio_page,ajax_fade,page_not_loaded,,vertical_menu_enabled,side_area_uncovered_from_content,qode-child-theme-ver-1.0.0,qode-theme-ver-16.7,qode-theme-bridge,wpb-js-composer js-comp-ver-5.5.4,vc_responsive
 

Archive

Sanding and Sealing this hardwood floor in Wilmslow, the floor was many years old and we had to take extreme care on re-sanding because it was very thin. After sanding to a fine finish we applied a coat of Shellac barrier seal to stop any previously used wax from seeping back through then applied a further 3 coats of heavy duty Satin flooring seal and the customer was delighted at the transformation. BEFORE DURING AFTER ...

Fitting this prime oak woodblock flooring in Altrincham, we checked the sub-floor to assess for dampness. We then levelled sub-floor with latex levelling compound before fitting the unfinished prime oak blocks in Herringbone style with a two block border. We then sanded the new flooring to a fine finish before applying 3 coats of heavy duty flooring lacquer. ...

Customer requested sanding and sealing of existing parquet flooring in Sale to its natural state. The floor had been previously badly sanded and stained in a mahogany finish.   We began by rough sanding the floor with a 36 grit paper and then proceeded to sand using 50 grit, 80 grit, 120 grit and then 150 grit to achieve a super smooth finish.   We then applied 3 coats of heavy duty flooring lacquer in the customer choice of satin finish. BEFORE DURING  AFTER ...

Clients requested staircase fitted with Oak strip flooring in Didsbury. We assessed the overall condition of treads & risers and once we were happy they were in a suitable condition to be cladded gave the client a quotation to supply and fit 90mm wide, 18mm thick solid European Oak strip flooring. On receiving the go-ahead to undertake the project we stuck and then secret nailed the treads and risers as well as the hall and landing. ...